BusproHDL Automation

HDL 4CH 16A High Power Switch Actuator with Current Detection MR0416C.431

4CH 16A High Power Switch Actuator with Current Detection has 4 channels(16A for each channel) and 50A magnetic latching relay. With low power consumption and long lifetime, the module has manual control switches and supports scene and sequence control.

  • 4-channel relay output unit

  • Scene control and sequence control

  • Up to 4 separate zones

  • 8 scenes for each zone, scene running time up to 60 minutes

  • 2 sequences for each zone, up to 4 steps for each sequence

  • Light protection delay for each channel (0-60 minutes)

  • Mass turn-on delay for each channel(0-25 seconds)

  • Manual switch for each channel

  • Stair lamp function of the channel settable

  • Channel current, used time of load and alarm status of each channel can be detected.

  • Selected scene or scene before power off automatically activated when device restarts

  • Specified scene or no operation for options when power off

  • HDL Buspro communication

  • Supports online upgrade

Basic Parameters

  • Working voltage: 24~30V DC

  • Working current: 35mA/24V DC

  • Input voltage:120V/240V AC (50/60Hz)

  • Output channel: 4CH/16A

  • Relay: 50A Magnetic latching relay

  • Maximum current of each channel:16A

  • Electronic life time of relay: >60000 (Resistance load)

  • Protection: Connect a breaker in each channel

External Environment

  • Working temperature: -5~45
  • Working relative humidity: ≤90%

  • Storage temperature: -20~60

  • Storage relative humidity: ≤93%

Specifications

  • Dimensions :72mm×90mm×64mm
  • Net weight :248g

  • Housing material :Nylon, PC

  • Installation:35mm DIN rail installation

  • Protection rating (Compliant with EN 60529) :IP20

Recommended Load Types and Power

  • 240V, 16A, Resistive, 100,000 cycles, 40°C;
  • 240V, 16FLA/96LRA, Motor, 30,000 cycles, 40°C;

  • 240V, 16A, Standard Ballast, 30,000 cycles, 40°C;

  • 240V, 16A, Electronic Ballast, 6,000 cycles, 40°C;

  • 120V, 16FLA/96LRA, Motor, 30,000 cycles, 40°C;

  • 120V, 16A, Electronic Ballast, 6,000 cycles, 40°C;

  • 120V, 16A, Standard Ballast, 30,000 cycles, 40°C;

 

Datasheet

Write a review

Note: HTML is not translated!
   Bad           Good
Captcha

HDL 4CH 16A High Power Switch Actuator with Current Detection MR0416C.431

  • $260.00


Related Products

HDL Logic Automation Module MCLog.431

HDL Logic Automation Module MCLog.431

Logic Automation Module is used for controlling over a series of targets. Totally 12 logic groups, ..

$275.00

HDL 1200mA Power Supply Module MSP1200.431

HDL 1200mA Power Supply Module MSP1200.431

1200mA Power Supply Module can provide 24V DC voltage, 1200mA current with 2 connection types. The ..

$225.00

HDL 750mA Power Supply Module MSP750.431

HDL 750mA Power Supply Module MSP750.431

750mA Power Supply Module can provide 24V DC voltage, 1200mA current with 2 connection types. The to..

$155.00

HDL 2400mA Power Supply Module MSP2400.232

HDL 2400mA Power Supply Module MSP2400.232

2400mA Power Supply Module can provide 24V DC voltage, 1200mA current with 2 connection types. The t..

$290.00

HDL 4CH 10A High Power Switch Actuator MR0410.431

HDL 4CH 10A High Power Switch Actuator MR0410.431

4CH 10A High Power Switch Actuator has 4 channels (10A for each channel) and 16A magnetic latching ..

$220.00

Tags: hdl, 4ch, 16a, high, power, switch, actuator, with, current, detection, mr0416c.431, buspro, hdl-mr0416c.431, automation